Blue Square Sheets for 3D Printer

There is a need for tape on 3D printer beds to hold the print together. This Scotchblue tape comes with 10 sheets in the pack. It is pretty inexpensive due to the sale they are having Amazon. Apply this blue sqaure stickers with Makerbot Replicator 2 3D printers. According to Amazon,  it is highly rated compared to the Kapton tape. The size is a medium sized blue square sheet.

The seller is Scotch from Amazon. The reduced the price without even the need for coupons. There has been nothing but good reviews for people using the Makerbot Replicator 2.

3D Printer Blue Square Sheets for Sale

 

3D Printer Tool Kit for Sale

[table style=”1″]

Toolkit for 3D Printers Looking for a tool kit for your 3d printer that can just about do anything? This tool kit is compatible with all types of ABS and PLA 3D printers including the RepRap 3D printer, Afinia 3D Printer, MakerBots, Printrbots, MakerGear, Solidoodle, the Ultimaker 3D Printer, and many more types. There are 5 different types of tools in this tool kit that will be used to work in a multitude of curves, corners, and remove plastic and wood raft and support. The 3D printer tool kit has long lasting steel blades with a comfortable handle grip. Buy this tool kit for your 3D printer!

[spacer size=”10″]

[frame align=”center”]checkout_by_amazon[/frame]

 

[/table]

 

 

PrintrBoard Electronics for PrintrBot, Mendel, or RepRap

[table style=”1″]

[frame align=”center”]Printrboard Electronics for RepRap, Mendel, and Printrbot[/frame] Looking for the PrintrBoard Electronic part for your 3D Printer? This affordable PrintrBoad Electronic is compatible with PrintrBot 3D printers, Mendelprinters, or your RepRap 3D Printer. The PrintrBoard motherboard is fully assembled and professionally soldered. The following LUFA CDC Bootloader and Marlin RC2 firmware are preloaded on the board and ready for you to use right away. These boards are each flashed and tested for optimal 3D printing usage. Buy this cheap Printrboard electronic motherboard for your PrintrBot, Mendel, or RepRap 3D printer today!  [spacer size=”20″][frame align=”center”]ebay-button-2[/frame]

[/table]

Hobbed Bolt M8 for Wade Extruder

[table style=”1″]

[frame align=”center”]Hobbed Bolt M8 for Wade Extruder[/frame] Need a cheap Hobbed Bolt for your Wade Extruder?  This specific Hobbed Bolt is M8 x 55mm bolt with a 60mm over length, hobbed center 25 mm from the bottom of the cap. This hobbed bolt fits your Wade Extruder with standard gears and works great with 3mm filament. This Hobbed bolt is perfect with an excellent driving force. Not only is this affordable hobbed bolt m8 for the Wade extruder, but it works with equivalent extruders as well. Buy this bbed bolt for your 3d printer extruder today for an affordable cost.  [spacer size=”10″][frame align=”center”]ebay-button-2[/frame]

[/table]

 

Glass Platform for Afinia and UP! 3D Printers

[table style=”1″]

Glass Platform for Afinia and UP! Looking for a new platform for your Afinia or UP! 3D printer? As you advance in 3D printing, the original perf board is not exactly the best option. With this Borosilicate glass Afinia/UP! printer platform you will really appreciate the ability to print models without raft. This base has a very nice smooth mirror-like finish to it. This high temperature glass has a melting temperature near 800° C. The platform has a high resistance to thermal shock compared to the regular glass that comes with the 3D printer. This cheap and affordable glass platform is perfect for your Afinia and UP! 3d printers.[spacer size=”10″]

 [frame align=”center”]checkout_by_amazon[/frame]

[/table]

 

 

Digital Calipers for 3D Printers

[table style=”1″]

[frame align=”center”]Digital Calipers for 3D Printers[/frame]
Looking to buy a Digital Caliper for your 3D printer needs? This Digital Calipers is made for your RepRap, Makerbot, UP! 3D printers. Why is the digital caliper important for your 3D printer? Because you will need it to calibrate to your frame on the printer and on its axes later on. You can get a cheap digital caliper from Amazon fast and easy. Batteries are included in the Digital Calipers, but remember to remove the battery as these calipers rarely turn off. You will need a Digital Caliper for 3D printer over regular calipers to do build a 3D printer the right way. [spacer size=”10″][frame align=”center”]checkout_by_amazon[/frame]

[/table]

 

Extruder Nozzle Temperature Switch

[table style=”1″]

[frame align=”center”]Extruder Nozzle Temperature Switch for Afinia and UP! 3D Printer[/frame] Is your 3D printer extruder nozzle melting your filament? This Extruder Nozzle Temperature Switch compatible for Afinia and UP! 3D Printers will help you with your melting problems. Most filaments melting points are usually lower in temperature. Your current extruder nozzle for your 3D printer is probably extruding at a higher temperature than the filament’s melting point. Buy this Extruder Nozzle Temperature Switch to lower the temperature 30 degrees C. Not only will it prevent your filament from melting, but it is easy to put on and take off on the extruder cover. Buy the Extruder Nozzle Switch for your Afinia and UP! 3D printers. [spacer size=”10″][frame align=”center”]checkout_by_amazon[/frame] 

[/table]

 

 

3mm Pink PLA Filament For Sale

 

[table style=”1″]

[frame align=”center”]3mm Pink PLA Filament for Cheap[/frame] Looking for a pink 3mm PLA filament compatible with the RepRap 3D printer, MakerBot 3D printer, Makergear 3D Printer, plus more pink filaments. The spool is perfect for your 3mm 3D printer needs. Pink PLA filament is 3mm in diameter made fully of high quality plastic product. This company states that its plastic filament comes of high quality with no air bubbles nor oily residue. You will receive the 3mm filament on a spool close to 2.4 pounds in total shipping weight. Buy this pink 3mm filament on sale for your 3D printer today![spacer size=”10″][frame align=”center”]checkout_by_amazon[/frame]

[/table]

Blue Glow in the Dark 3mm ABS Plastic Filament

 

[table style=”1″]

Glow In The Dark 3mm Filament Glow in the Dark Filament is a great piece to add to your filament collection. This 3mm Glow in the Dark Filament is affordable and of high quality. Buy this 3mm ABS plastic filament for your MakerBot 3D printer. The Glow in the Dark 3mm filament is also compatible with the RepRap 3D printer, Ultimaker 3D printer, and UP 3D printers. The extrusion temperature of this ABS black filament is between 210C-250C that extrudes precisely for fast printing and consistent layering. [spacer size=”15″]checkoutButton

[/table]

 

Black 1.75mm PLA Plastic Filament

 

 

[table style=”1″]

[frame align=”center”]PLA Plastic Black 1.75mm For Sale[/frame] Looking for a 1.75mm plastic PLA filament that is black? Order a PLA black filament from 3DPrinterFilaments.com for an affordable price. Get a high quality material of filament for a great price on your 3D printer. This black PLA plastic filament is inexpensively compatible with the RepRap printer, Makerbot printer, Ultimaker 3D printer, Rapman 3D printer. Avoid less stops in this black PLA filament in your 3D printing needs today! Go ahead and check out 3DPrinterFilaments.com now. 

[spacer size=”10″]

[frame align=”center”]checkoutButton[/frame]

[/table]